Hydro dip kit

The world of Hydrographic transfer printing

2013.12.31 17:05 N204life The world of Hydrographic transfer printing

Trying to get some people together to talk about all hydrodipping related write ups, tips and tricks, tanks, and paints and primers
[link]


2013.03.10 08:37 Enlightenment777 Official Printed Circuit Board (PCB) Subreddit

Official Printed Circuit Board (PCB) Subreddit - review / layout / manufacture / assembly / soldering / schematic capture / SPICE simulation. DipTrace, Eagle, KiCad, LibrePCB, Altium, Allegro, OrCAD, Gerber, Electronics, SPICE, Arduino, Raspberry, DIY, SMD. Please read schematic/PCB review instructions at [link](https://old.reddit.com/PrintedCircuitBoard/wiki/index#wiki_instructions_for_reviews)
[link]


2023.06.07 12:56 JordNew181 Help W/First Custom loop

I've never done a custom loop before so after some advice if I should be looking at different brand. My primary reason for choosing corsair, specifically for Pump/Fans is for integration into Icue, I want to keep everything in one place.
I'm torn between upgrading to a 3080 TI from a 3080 FE. The reason for being torn is I can't find if the Lenovo 3080 TI uses a reference design or not. The only information I can find is here: Videocardz.com and the information isn't much, at states
'This is actually the first board partner that we know of to be introducing major changes to the cooler for the Ti SKU. Both 3080 models are to feature the exact same reference board design, thus most AIBs opted to reuse existing coolers..'
Based on that I'm assuming it should be a reference board, I'm due to get the card back in person later this month so I can strip it down and actually look at the PCB. If anyone has any advice on how to determine the PCB that would be awesome too.. I've see a few things about looking at the PCIE connector, and logos but also seen contradicting information.
Hardware: CPU: i9-13900k GPU: 3080 FE or 3080 TI (From a Lenovo Prebuilt machine.) MB: Asus Prime Z790-p Wifi Ram: Corsair Vengeance DDR5 6200 Case: BeQuiet Silent Base 802 - White
  1. Water Blocks:
    1. 1 x XC7 RGB PRO (1700/1200/AM4) – White – CPU
    2. 1 x Hydro X Series XG7 RGB 30-SERIES REFERENCE GPU Water Block (3090, 3080 Ti, 3080)
  2. Radiators:
    1. 1 x XR5 360mm Water Cooling Radiator
    2. 1 x XR5 420mm Water Cooling Radiator
  3. Fans:
    1. 4 x 140mm (likely go for the ML, unless there's a better alternative)
    2. 3 x 120mm (likely go for the ML, unless there's a better alternative)
  4. Pump and Reservoir:
    1. 1 x XD5 RGB PUMP/RESERVOIR COMBO
  5. Tubing:
    1. 2 x XT Hardline 14mm Tubing - Satin Transparent
  6. Fittings:
    1. 3 x Hydro X Series XF Compression 10/13mm (3/8” / 1/2”) ID/OD Fitting Four Pack — White
    2. 1 x Corsair Hydro X Series XF Fill / Drain Valve - Chrome (CX-9055020-WW)
  7. Coolant:
    1. 1 x XL5 Performance Coolant 1L – Clear
    2. 1 x Blue Dye
  8. Thermal Paste:
    1. 2 x Thermal Grizzly Kryonaut
  9. Tools:
    1. Corsair Hydro X Series XT Hardline Tube Bending Kit
    2. Heat gun
    3. Power connector bridge
submitted by JordNew181 to watercooling [link] [comments]


2023.06.07 09:49 xeperis Is it expected for coolant to get "Caramerlized"?

Is it expected for coolant to get
I've been running custom loop
- Hydro X Series XD5 RGB Pump/Reservoir Combo - Hydro X Series XC7 RGB PRO CPU Water Block - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Gaming/Eagle mit Backplate - Hydro X Series XL5 Performance Coolant 1L — Red - 2x Hydro X Series XR5 360mm Water Cooling Radiator
Some PC Specs: - AMD 5800x3d - Gigabyte Vision OC 3080 Ti
After over a year I've decided to drain everything for maintenance and discovered that my GPU block looked terrible. I thought at first that this was corrosion but after taking apart everything (pump, cpu block, gpu block) I found that it was only GPU block that had the coolant caramelized. In fact it was so bad it took a lot of effort to clean out the gunk. Fins had it worst as they were all cloged up and it really felt like cleaning a frying pan that has been used daily for a year and never ever washed. Other parts of it like memory pools had a gelatine like layer stuck to them.
CPU block had some dirt like substance near the outlet port which washed away just by dipping it into distilled water. The pump and reservoir almost had nothing wrong with it (some flakes). I suspect that this is due to insane thermals of the RTX 3080 Ti and the coolant not designed to withstand extended contact with such heat.
What do others think?
https://preview.redd.it/qzazl0uktj4b1.jpg?width=3024&format=pjpg&auto=webp&s=b16565b56fd66666f6c59ecae1ba038734f2cf46
https://preview.redd.it/x6iqm0uktj4b1.jpg?width=3024&format=pjpg&auto=webp&s=feae5e41f97306dd84c651d3620983ad54633675
submitted by xeperis to watercooling [link] [comments]


2023.06.07 06:15 OSPFvsEIGRP Getting started ony 2019 Ram 1500 (5th gen) overland build

Getting started ony 2019 Ram 1500 (5th gen) overland build
I'm going to be starting phase one of my overland build for my 2019 Ram 1500 DT (5th gen) in about a week. I spent some time tonight to draw out what I'm going to do in the first phase, then added to it what I think I'm going to do with it eventually (maybe 3-5 years). I'd love to drive the DempsteInuvik–Tuktoyaktuk Highway and dip my toes in the Arctic ocean some day.
Phase 1: -AIMS Power 3000 WATT Pure SINE Power Inverter 12 VDC to 120 VAC - UL
-Rough Country Dual Black Series 6"" LED Grille Kit for 19-22 Ram 1500-70783, Rough Country
-Heise LED Headlight replacements
-Redarc TVMS PRIME REDVISION SYSTEM
-Redarc SMART START SBI 12V 100A
-Power outlet I'm truck bed and in Cab
--Mopar 2-inch lift kit (77072424AE)
-Mopar Bed Step for Base Tailgate Vehicles (82215289AH)
-DL+ 12V 135AH/ DUAL PURPOSE 1000CCA STARTER BATTERY PLUS DEEP CYCLE PERFORMANCE (DAK-US-213426)
Phase two will include some bigger things like a rear bumpesetup that allows for spare tire and Jerry cans as well as a racknride (thinking about getting a Royal Enfield Himalayan as an adventure bike so I can use it to make short trips from camp when I've got everything setup and need to pick something up from the store or whatever). I also really dig the super pacific X1 for a toppetent and gooseneck gear for storage in the truck bed.
I was saving up for a house. Looks like it'll be a bit longer before I get out of my apartment.
submitted by OSPFvsEIGRP to TruckCampers [link] [comments]


2023.06.07 06:09 OSPFvsEIGRP Starting my 2019 Ram 1500 (5th Gen) overland buildout

Starting my 2019 Ram 1500 (5th Gen) overland buildout
I'm going to be starting phase one of my overland build for my 2019 Ram 1500 DT (5th gen) in about a week. I spent some time tonight to draw out what I'm going to do in the first phase, then added to it what I think I'm going to do with it eventually (maybe 3-5 years). I'd love to drive the DempsteInuvik–Tuktoyaktuk Highway and dip my toes in the Arctic ocean some day.
Phase 1: --AIMS Power 3000 WATT Pure SINE Power Inverter 12 VDC to 120 VAC - UL. --Rough Country Dual Black Series 6"" LED Grille Kit for 19-22 Ram 1500-70783, Rough Country. --Heise LED Headlight replacements. --Redarc TVMS PRIME REDVISION SYSTEM. --Redarc SMART START SBI 12V 100A. --Power outlet I'm truck bed and in Cab. --Mopar 2-inch lift kit (77072424AE). --Mopar Bed Step for Base Tailgate Vehicles (82215289AH). --DL+ 12V 135AH/ DUAL PURPOSE 1000CCA --STARTER BATTERY PLUS DEEP CYCLE PERFORMANCE (DAK-US-213426).
Phase two will include some bigger things like a rear bumpesetup that allows for spare tire and Jerry cans as well as a racknride (thinking about getting a Royal Enfield Himalayan as an adventure bike so I can use it to make short trips from camp when I've got everything setup and need to pick something up from the store or whatever). I also really dig the super pacific X1 for a toppetent and gooseneck gear for storage in the truck bed.
I was saving up for a house. Looks like it'll be a bit longer before I get out of my apartment.
submitted by OSPFvsEIGRP to Ram_Overlanding [link] [comments]


2023.06.07 06:01 OSPFvsEIGRP Starting my 2019 Ram 1500 (5th gen) Overland build out

Starting my 2019 Ram 1500 (5th gen) Overland build out
I'm going to be starting phase one of my overland build for my 2019 Ram 1500 DT (5th gen) in about a week. I spent some time tonight to draw out what I'm going to do in the first phase, then added to it what I think I'm going to do with it eventually (maybe 3-5 years). I'd love to drive the DempsteInuvik–Tuktoyaktuk Highway and dip my toes in the Arctic ocean some day.
Phase 1: -AIMS Power 3000 WATT Pure SINE Power Inverter 12 VDC to 120 VAC - UL -Rough Country Dual Black Series 6"" LED Grille Kit for 19-22 Ram 1500-70783, Rough Country" -Heise LED Headlight replacements -Redarc TVMS PRIME REDVISION SYSTEM -Redarc SMART START SBI 12V 100A -Power outlet I'm truck bed and in Cab --Mopar 2-inch lift kit (77072424AE) -Mopar Bed Step for Base Tailgate Vehicles (82215289AH) -DL+ 12V 135AH/ DUAL PURPOSE 1000CCA STARTER BATTERY PLUS DEEP CYCLE PERFORMANCE (DAK-US-213426)
Phase two will include some bigger things like a rear bumpesetup that allows for spare tire and Jerry cans as well as a racknride (thinking about getting a Royal Enfield Himalayan as an adventure bike so I can use it to make short trips from camp when I've got everything setup and need to pick something up from the store or whatever). I also really dig the super pacific X1 for a toppetent and gooseneck gear for storage in the truck bed.
I was saving up for a house. Looks like it'll be a bit longer before I get out of my apartment.
submitted by OSPFvsEIGRP to overlanding [link] [comments]


2023.06.07 05:59 OSPFvsEIGRP Overlanding Build

Overlanding Build
I'm going to be starting phase one of my overland build for my 2019 Ram 1500 DT (5th gen) in about a week. I spent some time tonight to draw out what I'm going to do in the first phase, then added to it what I think I'm going to do with it eventually (maybe 3-5 years). I'd love to drive the DempsteInuvik–Tuktoyaktuk Highway and dip my toes in the Arctic ocean some day.
Phase 1: -AIMS Power 3000 WATT Pure SINE Power Inverter 12 VDC to 120 VAC - UL -Rough Country Dual Black Series 6"" LED Grille Kit for 19-22 Ram 1500-70783, Rough Country" -Heise LED Headlight replacements -Redarc TVMS PRIME REDVISION SYSTEM -Redarc SMART START SBI 12V 100A -Power outlet I'm truck bed and in Cab --Mopar 2-inch lift kit (77072424AE) -Mopar Bed Step for Base Tailgate Vehicles (82215289AH) -DL+ 12V 135AH/ DUAL PURPOSE 1000CCA STARTER BATTERY PLUS DEEP CYCLE PERFORMANCE (DAK-US-213426)
Phase two will include some bigger things like a rear bumpesetup that allows for spare tire and Jerry cans as well as a racknride (thinking about getting a Royal Enfield Himalayan as an adventure bike so I can use it to make short trips from camp when I've got everything setup and need to pick something up from the store or whatever). I also really dig the super pacific X1 for a toppetent and gooseneck gear for storage in the truck bed.
I was saving up for a house. Looks like it'll be a bit longer before I get out of my apartment.
submitted by OSPFvsEIGRP to ram_trucks [link] [comments]


2023.06.07 02:52 cbvv1992 🔥65% Off Code And Clip Coupon – $10.49 Portable Nail Drill with Power Bank Kit, Beloving Electric File for Acrylic Dip Gel and Natural Nails

🔥65% Off Code And Clip Coupon – $10.49 Portable Nail Drill with Power Bank Kit, Beloving Electric File for Acrylic Dip Gel and Natural Nails submitted by cbvv1992 to DealAndSale [link] [comments]


2023.06.07 00:55 raksasas Carburetor kit for a Robin EH29C.

Hi there, I am looking for a carburetor kit for a Robin EH29C motor. I am finding very little for markings on the carb: a TK looking symbol and some dots. I am not finding a brand or identifying numbers on it. I currently have carb off and doing a couple day dip in carb cleaner before I start disassembly of it. I am mainly trying to find a new bowl gasket for it and anything else that would be of use.

This is for a Jacobsen 810 Express.

Edited to add a little more to it...
submitted by raksasas to smallenginerepair [link] [comments]


2023.06.07 00:54 naveedurrehman Some Creative Food Hacks 🤤

Some Creative Food Hacks 🤤
I have compiled a list of creative food hacks in this yummy mind map 🤤. Did I miss anything?

Some Creative Food Hacks
submitted by naveedurrehman to foodhacks [link] [comments]


2023.06.06 15:56 Uraveragedadd New Lawn for New Construction. Need Advice for Short Cut Grass and Reel Mowers

New Lawn for New Construction. Need Advice for Short Cut Grass and Reel Mowers
I am currently in the process of building a new house on a 1/2 acre lot in Upsate NY (unsure of growing zone). Included in our build is an inground sprinkler system as well as a hydro seeded yard. After seeing some of our neighbors yards, I am most likely going to refrain from doing the hydro seed and plant my own seed this fall.
I had our previous house’s yard dialed in with KBG but needed to be cut at 3”. For this house, I am going for a short reel cut yard. That being said, what seed should I plant?
Also, for those that reel mow, what is a good mower to use to cut between .500 to and inch? I’ve looked at the Toro Flex which can go up to an inch with the height kit. Only problem is that the width of 21” seems too small for a 1/2 acre. Swardman any good? Thanks
submitted by Uraveragedadd to lawncare [link] [comments]


2023.06.06 13:38 SelectionPhysical158 what do you think of my custom hydro dipped ds lite lid?

I hydro dipped it in black and chrome paint but the 2 colours hated each other and separated but I dipped it anyway and I think it looks cool
submitted by SelectionPhysical158 to NintendoDS [link] [comments]


2023.06.06 10:45 RegularWeird683 It is a good config?

Hello Guys,
I'm curious about your opinions. :)
It's my first own config, that's all I could get out..
- Arctic F14 PWM PST Black - FSP 800W 80+ Bronze Hydro M Pro - ASRock B550M Phantom Gaming 4 - AMD Ryzen 7 5700X 4,6 GHz AM4 Box - Be quiet! Dark Rock 4 - Kingston 32 GB DDR4 3200MHz Kit ( 2x16GB) Fury Beast Black - RTX 4070 Gaming OC 12G - Kingston 1TB M.2 2280 NVMe NV2 - Western Digital 1 TB M.2 2280 NVMe SN570 Blue
Thanks everyone.
submitted by RegularWeird683 to buildapc [link] [comments]


2023.06.06 02:31 CookieButterLovers [MEGATHREAD] May 2023 Wrap-Up Discussion Thread: List of NEW and Limited Spring Seasonal Items - to help others, let's discuss which new May 2023 products you liked and didn't like and which Spring and Summer Seasonal products you're excited are back or are looking forward to! 😊

For this post to show up as a sticky, please sort all subreddit posts by Hot (not New).
Note: Not all products arrive in all stores at the same time and some might only be available regionally. Please contact your local store for product stock questions and estimated arrival dates.
There were a few new May products that were VERY limited and may no longer be available in stores as of June (Beach Day Gummy Candy, Madagascar Vanilla Bean Crème Fraîche, S'mores Clusters). 😔
Please leave a comment if you've seen a new or seasonal item from May that's not listed here!
As always, please upvote this post if you find the monthly product list Megathreads helpful to you.
🆕 New for May 2023 (some may have shown up end of April or beginning of June)
Not new but may be changing suppliers or packaging in some regions, YMMV - please comment with your region if you’ve noticed new packaging for the Pesto, Pizza Sauce, Tabouli, or Tzatziki):
🌷Returning Spring & Seasonal Limited Items that returned in April / May / June:
Back In Stock after being Temporarily Out Of Stock (YMMV, may not be back in all regions):
Temporarily Out Of Stock in some regions, YMMV:
Soon-To-Be-Discontinued:

🔮 Sneak Peaks rumored to be coming sometime in 2023:
submitted by CookieButterLovers to traderjoes [link] [comments]


2023.06.06 01:46 PsychologicalMoose74 A couple questions and open to criticism!

A couple questions and open to criticism!
Please don’t mind the misfit nail, it broke and I decided to try and work with it 😅. I’m still new to my dip powder journey, this being my third set now, but have a couple questions. Sorry for the longish post.
-When buffing the surface of my last set to prep for removal I noticed a couple times the file burned, just like the feeling of over-filing your natural nail-bed despite having nearly all of the product still on the nail. Was it my file or is this a common occurrence when hand filing dip? I’m very used to filing off full cover tips, gel, polygel etc and only ever experienced that when I was too close to my nail bed or running the file back and forth which I no longer do.
-Is it fine to use an E-file with dip nails? I noticed when I was trying to shape some areas, it was like I was filing through individual layers with a noticeable separation instead of one solid piece so I’m curious how this would translate with an electric file. Unless this phenomenon is just a “me” thing lol
-Is developing a runny nose while doing your nails considered a sign of dip-flu? Twice now I’ve developed a runny nose while doing my nails and it only stops once I’m done with the set and have everything cleaned up. It’s not long lasting at all, but I was thinking maybe this is a sign of sensitivity to maybe the liquids?
-How can I get a nicer cuticle area? I didn’t do so well at not flooding my cuticles this time around but I feel like typically it’s either too bulky or too far from the cuticle and looks grown out. Any tips for this?
And finally, how can I reduce the amount of base liquid thats loaded on the brush without taking so long it dries patchy? I’m currently using a Modelones mini kit and the liquids have very long brush stems, I don’t know if I just didn’t notice it before but this time around I was having such a hard time with the amount of product on the brush, it seemed like endless amounts of wiping on the neck of the bottle with then having too little on the bristles but a big drop threatening (and sometimes succeeding) to flood my nail. Is this a brush problem or a me problem? Thank you in advance for any insight, advice or criticisms!
submitted by PsychologicalMoose74 to DipPowderNails [link] [comments]


2023.06.05 21:15 SavingsSpare8104 How can thick nail polish dry more quickly?

How can thick nail polish dry more quickly?
Itchy nail polish is possible. Would you be interested in learning some electrifying ways to speed up the drying time of your thick nail polish? So let's talk about some fun methods for drying nail paint. Not to worry. Since UV lamps are widely used to cure nail polish, we won't describe this tried-and-true technique. So here are some creative suggestions for accelerating the drying of nail paint.
We'll start with some steps you can take to keep bulk nail supplies your nails from accumulating heavy coats of polish. Therefore, avoiding thick nail paint is the easiest approach to get it to dry quicker.
Do you realize that lighter hues dry quicker than darker ones? So, if you're short on time, choose lighter colors. First, because they dry quickly and require fewer applications, metallic colors are the best. Additionally, selecting light colors helps you avoid mistakes.
A longer period of time should elapse between successive coats.
You need a lot of patience to do a manicure. But these days, patience is an uncommon quality. However, it is preferable to wait until the previous coats of nail polish have dried before adding the new one. Therefore, extending the time between layers can aid in preventing thick nail paint. Additionally, bubble formation is avoided by waiting two to five minutes between coatings.

BRING IN A HAIR DRYER

You must have gotten your manicure at a nail shop. How is nail polish dried? They don't have a blower fan, right? A table fan can also be used to dry nail paint. As an alternative, a blow dryer like a hair dryer can be excellent for drying your nail polish. The best part is that you can dry your nail polish using the cool settings on your hair dryer. It dissolves the nail paint and stops bubbles from forming. However, kindly keep it at a distance as it could damage the nail polish and dry the skin near the cuticle.
Do you find it surprising that cold water speeds up the drying of nail polish? Yes. It is a fairly ancient trick, therefore it can work. Your thick nail paint may dry out if you dip your hands in cold water. But before you paint your nails, we advise you acrylic nail brush to put some ice cubes in a basin. When you're done with the manicure, the ice cubes will have melted, and the water will be the ideal temperature for drying your nail polish. So, after finishing your manicure, immerse your nails in some cold water. In little time at all, your nail paint will be dry.

A SIMILAR JOB CAN BE DONE BY YOUR FREEZER

Your freezer ought to be able to dry your nails if cold water can. The freezer is stuffed with icy air. Therefore, it can serve the same purpose as cold water. Therefore, you can freeze your hands for two minutes to allow the cold air to dry your nail polish. But we are aware that your hands would be very cold. Use this method for no longer than two minutes. The polish's top coat will quickly dry thanks to this process.

yournailsupplier
Why doesn't the topcoat layer on dip manicures need to be cured with a UV lamp before they dry completely? First, a quick-dry topcoat that takes one or two minutes to dry is used for dip manicures. In order to do this, add a few drops of quick-dry topcoat and lightly brush it over the nail polish. The intriguing feature is that this solution prevents your nail paint from dissolving. But it immediately dries. Second, the topcoat layer gives your nails a glossy sheen and enhances their attractiveness.

OLIVE OIL CAN BE POWERFUL

Sometimes, tried-and-true methods are effective. With cold water, we have witnessed it. Olive oil or even baby oil will work wonders for drying your coats of nail paint. Your nail polish should dry in a minute or two with a few drops of oil. The oil does not adhere to or smear your nail polish, which is the nicest part. After a few minutes, you can rub the oil with a dry towel. Your nails are now palpable. They'd feel dry and tacky.

A RECENT FAVE IS HAIRSPRAY

You should use hairspray to dry your hair. However, pedicure kits did you realize that they can quickly dry your nails? Try it on your nail paint after purchasing a respectable hair spray from the nearby shop. One of the quickest methods for drying nail paint is this one. There is a big drawback, though. The top layer of your nail polish is dried by hairspray, but the layers underneath are left undisturbed. Therefore, this technique only works if your nails have a single wet layer at the top.

NAIL POLISH THAT DIES QUICKLY IS USEFUL

The title speaks for itself. The easiest way to get your nail polish to dry quicker is to use fast-drying nail polish. There are several high-quality brands on the market. These products allow you to paint your nails and watch the layers dry before adding the next one. However, we suggest that you carefully cap the nail paint bottle. If not, the polish will dry out inside the bottle and become useless.
Nearly all cosmetics retailers sell drying drops. Keep a few bottles on hand in your manicure equipment. They work wonders in speeding up the drying of your nail polish. Additionally, these drops can moisturize and condition your cuticles. However, these droplets do not pierce the layers of your nail paint. The top is then dried.

LAST THOUGHTS

We've covered seven fun alternatives to help nail primer your thick nail paint dry more quickly. However, we assert that avoiding having thick nail paint is the greatest way to dry it. It is preferable to use thin layers and make sure they are completely dry before adding more.
submitted by SavingsSpare8104 to u/SavingsSpare8104 [link] [comments]


2023.06.05 18:44 windinthewillows87 Need some base coat suggestions

I'm new to dip powder, and I've been using the kiara sky kit. The powders are amazing but I'm having trouble with thick layers. I've tried to use less base coat, a stiffer brush to remove the powder between coats. I pour the powder on as well. I'm thinking it's the base liquid being too thick. Does anyone have any suggestions on better base coats ? Or any suggestions on how to produce thinner layers?
Thanks!
submitted by windinthewillows87 to DipPowderNails [link] [comments]


2023.06.05 18:25 coolin_79 Toilet_Kick.mp3 in 30's Rage Of Dust?

Playing 30 for the first time and loving it, but I just got to the mission where you recruit Mikazuki, and hearing his music in I immediately picked up on an obscure sample in the drop.
At around 25 to 26 seconds into the song, and a few other times throughout in dips and drops there seems to be a somewhat distorted instance of "toilet_kick.mp3" a really stupid drum kick that sounds like a distorted fart played over a drum kick. I unfortunately don't have a source on the sound as I've heard the audio passed around under the context of "A weird soundbite I found in a drum kit I found on reddit." but searching toilet_kick.mp3 should find you instances of it.
I swear to god it's the exact same sound someone else look this up and confirm I'm not crazy
submitted by coolin_79 to Super_Robot_Wars [link] [comments]


2023.06.05 12:24 adapang000 Is this a good deal for 1,496$?

Is this a good deal for 1,496$? submitted by adapang000 to pcmasterrace [link] [comments]


2023.06.05 07:56 StainlessSteel218 Potential beginner looking for advice

Hello everyone!
I recently watched that one documentary about shrooms where they talked a lot about the benefits and experience, and being a weed stoner myself, thought “fuck it, why not?”
  1. Now. I have no idea where to start. I’ve looked into some tutorials and decided I’d try my luck with some grow kits. After looking into the rules for a bit, it seems those are fine to discuss here. Is there any specific kit that seems to be the best around? I’d ideally want something on the more budget-side as I’m trying to just dip my toes in a bit before I really go balls to the wall. Ideally anything under $40 would be nice, though I have no idea if that’s way too little or not. Any help is appreciated
  2. Another thing, as for specific….shrooms? Not sure if it’s called a strain or not lol. What kind of shroom is often the most recommended for beginners? I’ve heard GT being thrown around, but I also have access to a ton of other varieties like Albino Ape, Albino PE, BM, JMF, etc. this is the one thing I have absolutely zero clue about, and literally anything is a huge help. Right now I have my eyes set on GT and JMF (as well as some gourmet shrooms).
  3. Do I need any specific equipment to get started? I don’t really have much in terms of what I think I could use, and I see a lot of people talking about pressure cookers? Is any of that strictly necessary or is it just helpful for maximizing cultivation?
Again, I really do appreciate any and all help I can get, I would love to be a part of this community that I’ve been on/off following for so long
submitted by StainlessSteel218 to shrooms [link] [comments]


2023.06.05 05:11 kennynailtech JELLY NAIL DESIGNS YOU MUST TRY RIGHT AWAY

JELLY NAIL DESIGNS YOU MUST TRY RIGHT AWAY
For starters, Dua Lipa, Cardi B, Lil Nas X, Megan Fox, Lizzo, and Kylie Jenner have all rocked jelly nails. Or perhaps we should argue that because the jelly nails are translucent, we have "seen through" them.
Glossy, translucent, and vibrant they are. Jelly nail store supply near me nails can be decorated in a variety of ways, but they are transparent like lip gloss. Additionally, performing this kind of manicure at home is simple. Check out these jelly nail art patterns that you need to attempt right away.

DOING JELLY NAILS: A GUIDE

Using jelly nude nail paint is the easiest technique to create jelly nails. It already has a smooth, glass-like texture and is translucent.
Look at this collection of trendy-colored gel polishes

24 COLOR SET OF THE LAVIS JELLY NUDE GEL COLLECTION

These jelly nude gel hues are transparent but vibrant, and they last for up to 3 weeks. The polish is easy for beginners to apply and remove, and it has a lovely fragrance. To fix it, all you need is a nail lamp.
Another choice is to thin out your preferred nail paint by adding a clear top coat to make it translucent.
In essence, you'll require:
conventional manicure equipment, such as a nail lamp and a file, to prepare and shape the nails
Here is the nail lamp we like best. It is strong enough for a salon while still being ideal for beginners:

UV/LED NAIL LAMP by LAVIS

All varieties of gels can be cured in a matter of seconds with 96 watts of electricity. Set the timer, and when you need the light, the motion acrylic powder wholesale near me sensor will turn it on. The polish is evenly cured thanks to the interior's high degree of reflection.
Additionally, this lamp is simple to transport because of its long-lasting rechargeable battery.
Start with a transparent base layer when using jelly gel polish, and cure it under a nail lamp. After that, brush on two transparent gel layers, curing each one between coats. Add a high-gloss top coat to complete.
However, if you want a clear color, you can experiment with diluting gel polish. In order to get the correct level of translucence, add a few drops of top coat. Once you're content, the application procedure is the same. A base coat, two thin coats of jelly color, and a top coat should all be applied using a brush.

WHAT IS 3D JELLY NAILS?

Add a little glitter to the varnish to give the jelly nails additional dimension. Use a toothpick or dotting tool to evenly disperse the sparkles before curing it.
A topcoat like the eggshell gel that specks the surface is another option.
Alternately, you might get ideas from the 3D jelly nail designs from Korea and Japan. Nail artists begin by applying many coats of translucent jelly polish. Then, they use hard gel or building gel to cut out shapes of clouds and rainfall.

TRY THESE DELICIOUS JELLY NAIL DESIGNS

It's time to use your imagination. As you peruse the jelly nail design ideas below, feel free to let your creativity run wild.

Watercolor

Beautiful jelly nails with watercolor designs. But how can you create the colorful whirlpool? We've discovered that blossoming gel polish is a miracle worker.

BLOSSOM GEL POLISH, LDS

A translucent polish is called blossoming gel or blossom gel. Don't cure it; just apply it. Replace that with adding the colored gel and observing how the color spreads or blossoms.
However, a color cannot be sufficiently thinned out by blooming gel to become translucent. Use a pre-diluted or ready-made jelly hue for optimal results.
You can substitute jelly nude polish for blossom gel in the marble nail tutorial.

CONFETTI

With confetti and jelly nude nail paint, have a party on your hands. When applied to a jelly French manicure with long tips, the look is even more striking.

CHROME

Chrome jelly nails? Please, yes.
Make those jelly nail shine with chrome powder!

yournailsupplier

POWDER SET FOR CHAMELEON CHROME NAIL PIGMENT

The color of the chameleon chrome powder varies based on the type of light, the color of the background, and the viewing angle. It works with acrylic nail art, builder gel, gel paint, dip powder manicures.

HOLOGRAPHIC Holographic

There are numerous methods for adding holographic depth to jelly nails. You may include confetti or holographic stickers, for instance.

JELLY NAILS WITH GLITTER

The sparkling Aurora top polish gives jelly nails unique effects. It's not your typical glitter nail polish. Choosing which colour to use first is the most difficult aspect of using it.

JELLY NAILS WITH EMBLAM

We are now moving towards 3D nails. Before embossing the surface with hand-painted or stamped designs, apply the jelly nude gel and nail products suppliers near me allow it to set. Five distinct emboss gels in varying colors are included in the kit. Do you have an image in your mind of blue jelly nails with silver lightning flashes on them?

FRUIT OR CLOUDS IN 3D

What's the trick to creating jelly nails with clouds, fruit, gummi bears, or jellyfish? Builder gel is the catalyst.

GEL LAVIS BUILDER

All 6 building gel colors are included in this collection. It has a glossy finish, a smooth texture, and is entirely real gel. Like any other gel, it can last for up to three weeks. Furthermore, an LED nail lamp cures it in 60 seconds.
You may make it into any shape you want to dress up your jelly nails.

CAN LACQUER BE USED TO DO JELLY NAILS INSTEAD OF GELS?

Yes, nail lacquer rather than gel polish can be used to make jelly nail designs. The TikTok approach that's going around dilutes colorful polish with clear top coat to recreate.
We enjoy using the wonderful LDS nail nail technician supplies wholesale near me polishes since they resist chipping for up to 7 days. And they don't contain any harmful chemicals or 9-free.

CONCLUSION

Are you eager to create jelly nail art? One of the trendiest and simplest manicures to perform at home is this one. Take advantage of one of our sales to purchase what you need right away.
submitted by kennynailtech to u/kennynailtech [link] [comments]


2023.06.05 00:53 Rare-Knowledge9661 [WTS] Magnacut CRK, TOOR, Leathermans, Benchmades, SAK, Free OLight

TimeStamp

Small Magnacut Sebenza Timascus bead and Slip $500
D.O.B. November 8, 2022
Full kit, and extras.
Has been carried so there are some snails.
Factory edge but I did put a mirror polish on it because I think mirror edges look better.
Will be including CRK calfskin slip and an unbranded pocket clip.

Dovo 'Col. Ichabod Conk' Straight Razor $75
Got this a while ago wanted to try strait razor shaving never got around to it and still use my Hydro 5.
Made in Germany.There is some patina on the blade.Comes with hard plastic case.

Sealed in box FDE Cruwear Fixed Adamas $200 Ea
Not much to say, sealed in box. 3 available.

SOLD Adamas Bundle $300 Fixed and folder Adamas both FDE. Both have been used, the folder was sharpened the fixed blade has the factory edge and is still very sharp. Action on the folder is smooth and drops shut.I don't have boxes for either.

Black Benchmade Adamas Cruwear Fixed Blade $185
Got it on trade previous owner stated he didn’t use it. I put a mirror polish on the edge because Cruwear takes a great polish.
Comes with sheath and TekLock.

TOOR Merchant V1 $100
2nd owner, I did carry this but find myself going back to my CRK’sHas been sharpened to a mirror polish.
Titanium handles.Comes with knife, box, certificate and unopened FrogLube.

Leatherman MUT Bundle $300
2 Leatherman MUTs both have been carried and used but function fine. Both come with all 3 bits.

Leatheman Curl $75
Has been carried and used shows wealight scratches but no damageComes with tool, pocket clip and non original nylon sheath.

Leatherman Surge Black Oxide Surge $130 Ea
Both new never used, had to open one for timestamp picture. New in box never cut or carried. Still has factory oil on the tools.

Supertool 300M $120 Ea
2 Available. Sealed in box. Included is the tool, bit extender with sight adjustment tool, bit kit and Large Molle sheath.

Extras
Victorinox Swiss Army Rambler $15 ADD ON
Has been carried shows light scratches. I ground down the key ring for an easier carry, basically disappears in pocket. The small knife was useful but my favorite is the SAK scissors, they are awesome. Comes with knife tweezers and toothpick.

Black wallet Free with purchaseMarked “genuine leather”I use apple wallet so I have no use for this.

G-10 Spike $10 ADD ON
For times you want something sharp and can't carry a knife. G10 Spike! Comes with Kydex sheath.

CRKT LCK $20 ADD ON
Had one for a while, lost it and got this. Just don't carry it much so up for saleHas been used and sharpened.

Space Pen Cap-O-Matic $15 Add ON
Has been carried there is a blemish from use on the top (pictured)

Free OLight
Came in a bundle. I have no use for it. Free to you with purchase.

ZELLE, Apple Pay or PayPal Friends and Family, no notes PLZ. Paypal will shut down accounts for buying and selling knives they consider them weapons. If paying goods and services add 4% for fees
Traders shoot your shot. Nothing Chinese plz.
As always, happy to send more pictures to a concerned buyer just ask.
Willing to ship international but you pay entire shipping cost and I am not responsible after dropping it at my post office. I have sent international before and have had zero issues.
submitted by Rare-Knowledge9661 to EDCexchange [link] [comments]


2023.06.04 21:20 ham-solomi (WTS)(NJ) Spiritus, GMR, Crye, Random Gear Bits, AXL, Misc Gear

Reupload - updated Imgur with what sold & added some new items at the end. - https://imgur.com/a/7GpDKHk
ALL PRICES ARE SHIPPED TYD UNLESS OTHERWISE NOTED
Spiritus Systems LE Green Goblin halloween Patch Set - $50 Limited Edition from like 2 years ago. Green goblin with 2 smaller pumpkin patches that go with it. Look brand new - never worn just displayed on my patch wall a bit.
Replica (RGW) Surefire 7.62 M40 Suppressor & muzzle - $60 Unsure if I just can't fihure out the latching mechanism but I believe it funstions as it should. Used it just for the muzzle device on my sr25 becuase it looked sick.
Maple Leaf Crazy Jet (180mm) - $25 Basically brand new, never even installed in a gun. Purchased for a project that never came to fruition.
Spiritus Systems Blacked Out Wolf Patch - $40 Brand new - they only do these in limited quantity for Black Friday. I have 2 so this is up for sale.
Spiritus Systems Unicorn LMG Patch - $50 Another limited edition patch, don't really know the value on this but its cool.. may just keep it for my GF but if someone wants it for fiddy its yours.
RogueWorx Limited Loki (1/5) Splatter SSB - $125 1 of 5 in existence. Grabbed it for my underlever build but sold that before finishing it. Been holding onto it on the chance that I build another KC02 but I don't see it happening (at least for an SSB usage). Comes witht he springs and set screws. Price reflects rarity and my on-the-fence of selling it.
Generic M4 9" outer barrel - $35 Mounted but never fielded. No marks or signs of wear on it. Nice for a mk18 build
Petac Repro IFAk for belt kit - $20 Ranger Green Color. went a different route with my belt kit.
Zohan Ear Protection - $20 Functional and good for a helmet usage. Headband was removed.
Full Spiritus MK4 Chest Rig setup - $145 Fat Straps, Back Strap, MK4, Dangler Sack, + either 3 bank M4 or 4 bank smg insert included (you tell me which you want. Used a little and broken in but not abused or fraying.
Chest Rig wings - $25 each Nice to store your radio or some spare mags on the side of your rig plus a hook for your gloves. One right hand and one left hand.
GMR Mag Inserts - $50 each one is for JPC and one is generic larger. I can confirm sizes if you need. Nice pieces of kit from the GMR boys. I just don't really use them all that much.
GMR Kydex Banger Holders - $25 each Nice if you run nades. I dont find myself using them and don't run tan kit very often. my loss your gain.
BFG Ten speed dual mag pouch - $35 Tan, used, believe this is a piece of Ronin (GMR) kit.
LowPro Tan Helmet Scrim Cover - $30 Don't use tan on my helmets or any of my gear really.
MC Kydex M4 Pouch with molle clips - $25 Almost brand new, mounted once and worn around the house but no signs of wear, great piece of kydex gear for a belt setup.
Haley Strategic 7.62 Mag Pouch - $30 used on my belt, just didnt like how it fit with my kit. really nice construction and great retention for airsoft mags (GBB & AEG)
Stock TM Hicapa Slide - $40 Did your stock slide break and you just want another stock one to replace it instead of some fancy ass colorful slide? This is your listing! shoot me an offer, just feels bad throwing it away instead of sending to a good home.
Viking Tactics RAZE 2Piece belt setup - $50 brand new belt, like my gucci AXL belt more. This is a great beginner belt. Large size in black. comes with inner & outer belt
AXL Advanced Eclipse Belt - $130 Eclipse belt unused in grey in size L/XL with syzygy gen 1 inner belt as well as Raptor Buckle. Ranger green came in stock and I realize this was way too big for me. let me know any questions - may have some pouches I can throw in with it.
MC Black dump pouch - $15 unknown brand. really like this but grew out of my MC Black phase.
Condor OD Green Hydro Pack - $20 Nice piece of kit for low profile hydration carriage. comes with straps to use as a standalone backpack too.
Spiritus Back Panel GP Pouch - $40 Just the pouch that goes at the top of the back panel. accidentally ordered black instead of green like 2 years ago. this thing is new in bag. someone buy it please.
Ikea Chest Rig - $75 Don't really know if i want to sell this but throwing it up here for the price I'd let it go for. Has HSP kydex inserts for mag retention. really cool and mega scav cred.
Sunshine Custom Works Hand Warmer (choco chip) - $75 dangler function for the bottom of your chest rig. Great piece of kit with a little pouch for a hand warmer for winter months. I know we're past needing these but get ready for next year!
GMR Choco Chip Helmet Scrim Choco Chip - $75 Nice build quality, has choco ship velcro area that attaches to helmet or boonie with black scrim netting that hangs around your face.
Tokyo Marui G17 - $145 Basically stock, relatively used. Got scammed on this a bit ago and took forever to source the parts to get this working again through my local shop. This functions and comes with 1 action army magazine.
Crye G3 Tiger Stripe Combat Top - 2X Reg - $200 Basically new, worn once or twice. Fantastic condition with no signs of wear.
Crye G3 Tiger Stripe Field Pants - 40 Reg - $450 Same as the top. Lost a bunch of weight so none of this fits anymore.
Spiritus Systems Elastic Cummerbund - Size 2 - $70 Great condition
Spiritus LV119 Build - Size XL - $500 XL Plate Bags, XL Back Panel Adapter, Back Panel Core, Back Panel GP Flap, AXL Equinox Size L/XL, Tri-Fold Shoulder Pads, 556 Placard. Whole kit has seen only a few range uses and has virtually no salt or wear on it. AXL Equinox is brand new.
If my prices are wack let me know and I can adjust accordingly, but keep in mind price includes shipping fees. Generally expect me to ship on a Saturday but may be able to get something out during a weekday depending on work schedule.
submitted by ham-solomi to airsoftmarket [link] [comments]